Open Source WiFi 6 to Thread/BLE Matter IoT Gateway

Matter IoT Gateways (MIG) are in market ready enclosure and pre-certified. OpenSource codes are available to expedite your application firmware and software development. A matter gateway can be used as a:

• Bluetooth 5.3 to WiFi 6 gateway to route data between Bluetooth devices and cloud servers.

• Matter IoT gateway to route data between Matter (Thread/802.15.4) devices and cloud servers. The Bluetooth interface can be used for provisioning and operation supports.

• Bridge between a Matter network to a Bluetooth network, and with a cloud connection.Gateway Summaries

1. Micro USB connector.

2. WiFi 6 module, WM02C as shown. Other WM modules can be used.

3. Bluetooth/802.15.4 module, BT40F. An BT40NE (nRF5340+nRF21540) can be used to support long range 802.15.4/Bluetooth.

4. Reset button.

5. RGB LED. Two Red-Green-Blue LEDs defined by firmware.

6. UART. Connect to nRF5340 UART port.

7. External flash memory. 0, 4MB, or 16MB.

8. DFU button for gateway firmware upgrade.

9. Buzzer for audio alerting. It can be controlled by a cloud server.

10. 10.PS button. It can be defined by firmware for an end user to disable audio alerting.

11. 11.To connect to nRF5340 DK with a 10-pin flat cable (not included)

Matter Gateway Summaries

MIG02C40F

• WM02C WiFi 6 module, supports 802.11 a/b/g/n/ac/ax. Integrated chip antenna supports both 2.4 GHz and 5 GHz bands.

• BT40F, an nRF5340 BLE 5.3 module with an integrated antenna. Dual core Cortex M33, up to 128 MHz.

• 4MB flash memory for local storage

• A buzzer to alert user and a button to disable the buzzer

• $28.93 each at 1K pcs.

MIG02E40NE

• WM02C WiFi 6 module, supports 802.11 a/b/g/n/ac/ax.

• BT40NE, an nRF5340 BLE 5.3 module with an nRF21540 power amplifier, Up to +19.1 dBm TX power.

• an u.FL connector for an optional external antenna.

• Dual core Cortex M33, up to 128 MHz.

• 16MB flash memory for local storage

• A buzzer to alert user and a button to disable the buzzer

• $43.15 each at 1K pcs.

Hardware for programming

• A Nordic nRF5340 DK

• a Fanstel 10-pin flat cable included in any Fanstel EV board or PK board.

Certifications

FCC ID:

ISED ID:

QDID: 108621, 119517, 182626.

Order Products